Hi,
I have one question regarding the numbering function of Mellel. Is it possible to make chapter orientated numbering of secondary flow chart elements (Tables, Pictures).
e.g.
1. Chapter
Table 1.1
Table 1.2
2. Chapter
Table 2.1
3. Chapter
Table 3.1......
I read the Mellel guide and I am working now for several month with the program, but couldn't find out yet if this is possible.
I would appreciate it very much, if somebody could help me with this.
Thank you
Felix
numbering of secondary flow chart elements (Tables, Pictures
Moderators: Eyal Redler, redlers, Ori Redler
-
- Knows everything, can prove it
- Posts: 980
- Joined: Wed Oct 26, 2005 12:48 am
- Location: IE, CA, USA
Re: numbering of secondary flow chart elements (Tables, Pictures
In the Edit Auto-Title dialog, drag the "Structure" title flow associated with "tables" to an indent level below chapters. This will force them to restart their numbering when the chapters restart theirs. As far as number goes, you can use the "Prev#" element to add the chapter number to their presentation/display.
— Robert Cameron
Re: numbering of secondary flow chart elements (Tables, Pictures
Hi, rp,
I've tried this setup, but it doesn't seem to work:
Chapters set at Level 2. And they are numbering properly.
Figure title flow element below level 2.
Figure title format: FIG. "Prev#1"."Curr#": Title
The result? Figure Curr# is assigned properly, but the "Prev#1" comes out as a 0 in all chapters. So I have (in Chapter 1) "Fig. 0.1: Title", and in Chapter 3 I get Fig. 0.1, Fig. 0.2 . . .
I don't know why I'm not getting "Fig 3.1", "Fig. 3.2", etc. in Chapter 3, which seems to know it is chapter 3. The only Prev# element on my scroll-down list is #1, even if I enter it multiple times. It produces a "0" in every chapter. Mysterious, since other posts here seem to have success with this approach.
I'm using Mellel 2.7.1 build 3 on a 1.67 GHz PowerPC G4 Powerbook.
Paul
I've tried this setup, but it doesn't seem to work:
Chapters set at Level 2. And they are numbering properly.
Figure title flow element below level 2.
Figure title format: FIG. "Prev#1"."Curr#": Title
The result? Figure Curr# is assigned properly, but the "Prev#1" comes out as a 0 in all chapters. So I have (in Chapter 1) "Fig. 0.1: Title", and in Chapter 3 I get Fig. 0.1, Fig. 0.2 . . .
I don't know why I'm not getting "Fig 3.1", "Fig. 3.2", etc. in Chapter 3, which seems to know it is chapter 3. The only Prev# element on my scroll-down list is #1, even if I enter it multiple times. It produces a "0" in every chapter. Mysterious, since other posts here seem to have success with this approach.
I'm using Mellel 2.7.1 build 3 on a 1.67 GHz PowerPC G4 Powerbook.
Paul
Re: numbering of secondary flow chart elements (Tables, Pict
This is several years after the original post, but this works well. The trick is to move the Table/ Image / Figure structure not just under the chapter level header but under the next level below it. Then refer to Previous #2 and you get the chapter number. Just placing it under the Chapter level and using Previous #1 results in "0". Make sure to check "Reset numbering with higher level flow" for numbering to restart each chapter.